Your Hyundai’s Recommended Maintenance Schedule
Service #1
This service should be performed every 6,000kms or every 6 months, whichever comes first. This service includes:
- Oil change and OEM filter replacement.
- Inspect and set tire pressure to factory specifications.
- Measure tire wear pattern and tire depth.
- Inspect exterior lights.
- Inspect and lubricate all latches, hinges, and locks.
- Check and top up fluid levels. ( Coolant, brake, and washer fluids.)
- Perform battery test and inspection.
Service #2
This service should be performed every 12,000kms. This service includes:
- Oil change and OEM filter replacement.
- Inspect and set tire pressure to factory specifications.
- Measure tire wear pattern and tire depth.
- Inspect exterior lights.
- Inspect and lubricate all latches, hinges, and locks.
- Check and top up fluid levels. ( Coolant, battery, and washer fluids.)
- Perform battery test and inspection.
- Inspect all drive belts.
- Inspect vacuum, crankcase, and ventilation hoses.
- Inspect drive shaft and boots.
- Rotate tires (if required).
- Fuel system treatment.
- Oil system treatment.
Service #3
This service should be performed every 24,000kms. This service includes:
- Oil change and OEM filter replacement.
- Inspect and set tire pressure to factory specifications.
- Measure tire wear pattern and tire depth.
- Inspect exterior lights.
- Inspect and lubricate all latches, hinges, and locks.
- Check and top up fluid levels. ( Coolant, brake, and washer fluids.)
- Perform battery test and inspection.
- Inspect all drive belts.
- Inspect vacuum, crankcase, and ventilation hoses.
- Inspect drive shaft and boots.
- Rotate tires (if required).
- Inspect battery terminals.
- Test engine coolant.
- Inspect automatic trans axle fluid.
- Inspect brake pads and rotors.
- Inspect rear brake drums, linings, and parking brake.
- Inspect exhaust pipes and muffler (after manifold).
Service #4
This service is only applicable to Hyundai’s from 2011 and older. It should be performed every 48,000kms, includes:
- Oil change and OEM filter replacement.
- Inspect and set tire pressure to factory specifications.
- Measure tire wear pattern and tire depth.
- Inspect exterior lights.
- Inspect and lubricate all latches, hinges, and locks.
- Check and top up fluid levels. ( Coolant, brake, and washer fluids.)
- Perform battery test and inspection.
- Inspect all drive belts.
- Inspect vacuum, crankcase, and ventilation hoses.
- Inspect drive shaft and boots.
- Rotate tires (if required).
- Inspect battery terminals.
- Test engine coolant.
- Inspect automatic transaxle fluid.
- Inspect brake pads and rotors.
- Inspect rear brake drums, linings, and parking brake.
- Inspect exhaust pipes and muffler (after manifold).
- Replace engine coolant.